Loading Continuous Paper Onto The Rear Push Tractor - Epson FX-2180 Quick Reference Manual

Loading Continuous Paper Onto the Rear Push Tractor

To load continuous paper onto the rear push tractor, follow these steps.
Caution:
c
Do not load continuous paper with labels onto the rear push tractor; the labels may come off the
backing sheet and jam the printer.
1
paper guide cover
Open the paper guide cover and
remove the paper guide.
To remove paper from the paper path,
press the Load/Eject button. The
printer feeds the paper to the
standby position, where you can
remove the paper from the printer.
4
2
paper guide
Open both sprocket covers, and fit
the first four holes of the paper,
printable side down, over the tractor
pins. Then close the sprocket covers.
Note:
Load continuous paper that has a clean,
straight edge to avoid paper jams.
If you load continuous paper which
is a different size or thickness, you
need to adjust the position of the
sprocket units or change the paper
thickness lever setting. See Chapter 2
of the User's Guide for instructions.