Vortice VORT INVISIBLE MINI Instruction Booklet page 53

ENGLISH
Alarm: "Filters replacing"
After the preset time has elapsed, "Alarm" appears in "HOME" and the note "Replace Filter. Reset?" in the
"Alarms" page.
To replace the filters, follow the instructions in "Maintenance and Cleaning".
Pressing the [] key will display:
Alarm
Filters
NOTE : To Reset filters timer (See: Operation and Use: "Installer operation menu", "Reset fil") is resetted also
the counter.
Alarm: No Frost - Wait one hour
The equipment is equipped with temperature probes that measure the air temperatures.
In case of too low temperatures, No-frost alarm reports in "HOME" the message "Alarm!" "Lock!" and in the
"Alarms" page the note "Wait 1 hour". Pressing the [] key will display:
Alarm
No Frost
Alarm: "Ext Probe" damaged
The equipment is equipped with an External temperature probe that measures the air temperature extracted
from outside.The Probe Fault reports in "HOME" the message "Alarm!" "Lock!" and in the "Alarms" page the
note "Ext probe Call Service". Pressing the [] key will display:
Ext probe
Call
Service
For technical personnel, you must call the Service.
Filters
Check
clean
filter
No Frost
Wait
1 hour
ALARM
[ ▲ ]
9 9
[
NO
[ ▲ ]
9 9
[ ]
[ ▲ ]
NO
SI
[ ▲ ]
9 9
[ ]
[ ▲ ]
NO
YES
9 9
[ ] ]
]
NO
SI
9 9
[ ] ]
9 9
[ ] ]
53