Vortice VORT INVISIBLE MINI Instruction Booklet page 52

ENGLISH
"Alarms" page
Access the "Alarms" page only if the machine detects one of the problems detailed below:
• Pre-alarm: Filters checking
• Alarm: Filters replacing
• Alarm: No Frost - Wait one hour
• Alarm: Ext probe damaged
• Alarm: Int probe damaged
• Alarm: Exh probe damaged
Alarm with machine lock:
Alarm without locking the machine:
In case of alarms: From the "Main Menu" page, choose the "Alarms" row and press the [] key.
A new descriptive page shows the specific alarm text and troubleshooting instructions.
Warning:
! !
After 2 minutes with no keys being pressed, the display returns to the "Home" page without ! saving
any changes.
Pre-alarm: "Filters checking"
After the preset time has elapsed, "Alarm" appears in "HOME" and the note "Check clean filter" in the "Alarms"
page.To replace the filters, follow the instructions in "Maintenance and Cleaning".
Pressing the [] key will display:
Alarm
Filters
52
On the "HOME" page, are alternated shown the words "Alarm!"
And "Block!".
On the "HOME" page, is shown the word "Alarm!".
MAIN MENU
USE MENU
ALARM
SETUP
INFO
Filters
Check
clean
filter
without blocking the machine;
without blocking the machine;
occurs with the machine lock;
without blocking the machine (No Frost, By-pass: not
enabled);
without blocking the machine ("By-pass" not enabled);
without blocking the machine (No Frost not enabled);
[ ▲ ]
9 9
[ ]
[ ▲ ]
9 9
[
[ ▲ ]
SI
9 9
] [ ] ]
NO