Vortice VORT INVISIBLE MINI Instruction Booklet page 48

ENGLISH
From this new page you can manage:
• Setp Byp.
"Bypass" mode activates based on the outside
temperature: "Setp Byp" is selectable in a range between
15°C and 30°C (default 18°C).
• Lifetime
To set the filter duration time, which can vary between 3, 6
and 12 months.
• Reset Fil
In case of Filters replacing, you need to reset the Filters
Timer manually:
- select [YES] to reset;
- select [NO] to not reset.
• Modbus ID
In the presence of another installed remote user interface,
you can configure a different address than the default one
(which is "1").
• Speed
From "Installer menu" page, selecting "Speed", you can
join to "Setting speed". Here, you can set motorfan speeds:
(C) Clean air outlet inside the room;
(D) Stale air outlet to outside.
For more details on setting "Speed", See: "Setting Speed
Menu".
• Language
Language selection
• No Frost
Select "No Frost" from the Installer "Operations menu" to
access the "No Frost Menu." From here you can choose
the functions that can be activated during the "No Frost"
procedure.
For further details on how to select functions:
See: "Installer Operations Menu", "No Frost Menu".
48
SETP BYP.
018
LIFETIME
3
RESET FIL
SI
MODBUS ID
001
SPEED
VI1
Å
VO1
VI2
VO2
LANGUAGE
ITA
NO FROST
UN-BALAN.
HEATER Å
HEAT FORC
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]