Changing A User Pin - System 236, 2316 - C&K systems System 236 Manual

System: 236, 236i ,2316, 2316i ONLY
CHANGING A USER PIN - SYSTEM 236, 236i, 2316, & 2316i
User 1 can use his Master PIN to change the PINs of Users 1 - 6 (on System
236 and 236i) or Users 1 - 32 (on System 2316 and 2316i).
Enter your Master PIN, push
MASTER PIN
REQUIRED
the
push the # key.
.
The display will read PROGRAMMING.
Enter the User number and push the # key.
.
Enter User number 1 - 6 for System 236/236i.
.
Enter User number 1 - 32 for System 2316/2316i. (See Note below.)
Enter the new PIN and push
the # key.
.
The new PIN must be four digits long for System 236/236i.
.
The new PIN can be from two to five digits long for System 2316/2316i.
NOTE: On System 2316i, User Code #32 is reserved for special functions using the
* key, enter the digit "0", then
Optional Relay Output Module.
*
#
0
#
USER NUMBER
#
29