Guest Combination (Systems 238, 2316 Only) - C&K systems System 236 Manual

GUEST COMBINATION
OPTION
INSTALLED
The SYSTEM 238 and 238i can store up to 8 PINs and the SYSTEM 2316 and 2316i up to
32 PINs. In these systems, PIN #8 can be programmed as a GUEST COMBINATION that
will only be valid for a specified number of successive days. The countdown of days begins
the first time the GUEST COMBINATION is used.
.
Once the time expires, the GUEST COMBINATION will have to be reprogrammed before
it can be used again.
OPTION
RING BACK A.TER CLOSING
INSTALLED
When this option is installed, the bell/siren will sound for two seconds after the
system is armed.
.
If your system is programmed to send closing reports to a monitoring station, ring back
will occur after the signal has been sent and acknowledged; otherwise, ring back occurs
when the exit delay has expired.
(Not Available on System 236/236i)
NUMBER O. DAYS GUEST COMBINATION IS VALID
(Not Available on System 236/236i)
25