Test Procedures Index - C&K systems System 236 Manual

As required by UL Standard 1023, your alarm system is a Grade "A" system
(see definition on page 43).
Alarm system malfunctions and failures are caused most often by
INADEQUATE MAINTENANCE.
Your alarm system should be tested weekly to make sure that all detection
devices are working properly. In addition, if your system is being monitored,
you should periodically test its ability to transmit signals to our central station.
These tests should be performed weekly:
.
LOCAL SYSTEM TEST: Enter PIN (if required), then
.
CENTRAL STATION TEST: Enter PIN (if required), then
.
BELL/SIREN TEST: Enter PIN (if required), then
.
STANDBY BATTERY TEST
Refer to pages 35 through 37 for more information on test procedures.
*
6 0 #
*
6 1 #
*
6 3 #
*
#
6 4
45