Changing A User Pin - System 2316/2316I - C&K systems System 238 User Manual

CHANGING A SYSTEM 2316 AND 2316i USER PIN
User #1 can use the Master PIN to change the PINs of Users 1 - 32
MASTER PIN
REQUIRED
.
.
Enter your Master PIN, push the
key, enter the digit "0", then
*
push the # key.
The READY, ARMED and SERVICE lights will
flash slowly to indicate programming mode.
Enter the User number (1 - 32) and push
the # key.
Enter the new PIN and push
the # key.
The new PIN can be from two to five digits long.
NOTE: On System 2316i, User Code #32 is reserved for special functions using the
Optional Relay Output Module.
.
(See Below)
0 #
*
#
USER NUMBER
#
27