C&K systems System 236 Manual page 11

INSTANT ARMING
Instant Arming converts all time delayed zones to INSTANT zones.
PIN
REQUIRED
.
.
.
OPTION
INSTALLED .
Make sure that the display reads READY TO ARM.
Enter your PIN (if required),
*
push the key, enter the digit "7",
then push the # key.
The keypad will beep twice to confirm that the system is armed,
and the display will read ARMED - INSTANT.
The red ARM light will flash while the system is Instant Armed.
CAUTION: When the system is Instant Armed, you will not be able to enter through any
perimeter door or walk through any protected area without setting off an alarm.
Bypassing interior zones will allow you to move about freely inside the premises while
the system is armed. Refer to BYPASSING ZONES (pages 14 - 17).
Exit Delay Disable (see page 19).
*
#
7
11