C&K systems System 236 Manual page 17

System: 236 and 236i ONLY
.
To indicate that zones are bypassed, the display will read BYPASSED ZONE. To see
which zones are bypassed, push the # key.
1 NOTE: Zones can also be bypassed by remote programming. The system can either be
armed or disarmed for remote programming.
.
The procedures for adding a bypass and removing a bypass are identical.
.
To remove a bypass:
Enter your PIN, push the
from which the bypass is to be removed, then push the # key.
NOTE: Disarming your alarm system
Enter your PIN, push the
bypass is to be removed then press the # key.
*
key, enter the digit "2", enter the zone
OR
key, enter the zone from which the
REMOVES
all bypasses.
17