C&K systems System 236 Manual page 9

.
.
.
.
OPTION
INSTALLED
.
.
The rest of the Arming The System section describes other arming options, and explains how
to bypass zones before arming the system. No matter how your system is programmed, you
will always disarm it in the same way: enter your PIN, then push the # key.
Make sure the red ARM light comes on.
The keypad will beep twice to confirm that the system is armed.
The display will read EXIT NOW.
Exit through any TIME DELAY DOOR within
The exit delay time can be programmed from 10 seconds to 150 seconds.
If the EXIT PRE-ALARM option is installed, the keypad will beep slowly until 10 seconds
before the delay time expires, then rapidly for the last 10 seconds.
A bar graph will appear on the display, showing how much exit time remains.
Once the exit time has expired, the keypad will beep twice to confirm that the system is
armed, and the display will read ARMED.
seconds.
9