Table of Contents
Advertisement
HOME ARMING
Home Arming arms perimeter zones, while bypassing interior zones.
Make sure that the display reads READY TO ARM.
Enter your PIN (if required),
PIN
REQUIRED
push the
then push the # key.
.
The keypad will beep twice to confirm that the system is armed,
and the display will read ARMED.
.
The red ARM light will flash while the system is armed.
.
Home Arming allows you to move about freely inside the premises while the system is
armed.
.
When the system is Home Armed, you can enter the premises without setting off an
alarm through a delayed entry zone. (Don't forget to disarm the system after entry!)
OPTION
.
INSTALLED
Exit Delay Disable (see page 19).
12
*
key, enter the digit "4",
*
#
4
Hide quick links:
Advertisement
Table of Contents
