Duress (Systems 238, 238I, 2316, 2316I ,236I Only) - C&K systems System 236 Manual

POLICE/PANIC KEY
OPTION
INSTALLED
When this option is installed, holding down the POLICE key
for three seconds will trigger an alarm. The keypad will beep
twice to confirm the alarm condition.
DURESS ALARM
OPTION
INSTALLED
Should an intruder force you to turn your security system off or on, you can
send a silent DURESS signal to our central station by adding or subtracting
"1" from the last digit of your PIN. .or example, if your PIN is 1-2-3-4, entering
1-2-3-3 OR 1-2-3-5 will trigger a silent alarm. Your system will appear to be
operating normally. There will be no indication of an alarm condition.
.
If your PIN ends with a "0", entering "9" or "1" instead of the "0" will trigger a
DURESS signal.
.
If your PIN ends with a "9", entering "8" or "0" instead of the "9" will trigger a
DURESS signal.
(Available on Systems 238 and 2316 ONLY)
23