Standby Battery Test; Bell/Siren Test - C&K systems System 236 Manual

STANDBY BATTERY TEST

OPTION
INSTALLED
Your alarm system can be programmed to automatically test its standby
battery every 24 hours. During the test, AC power is turned off in order to
monitor the battery under load.
.
To manually test the standby battery, push the
key, enter the digit "6", the digit "4", then push
the # key. The display will read BATTERY TEST.
.
The standby battery test takes 2 minutes. During the test, the green AC light will be off.
.
If the battery is okay, the keypad will beep twice, and the display will read
TEST - PASSED. If the battery is low or dead, the green AC power light will flash, the
keypad will beep five times, and the display will read TEST - .AILED.
OPTION
INSTALLED

BELL/SIREN TEST

To test the bells/sirens in your security system:
PIN
Enter your PIN (if required), push the
REQUIRED
enter the digit "6", the digit "3", then push the # key.
.
The bell/siren and keypads will sound for 3 seconds.
36
*
*
6
*
6
*
key,
#
4
#
3