Guest Combination - C&K systems System 238 User Manual

GUEST COMBINATION

OPTION
INSTALLED
The SYSTEM 238 can store up to 8 PINs, and the SYSTEM 2316 can store up to 32 PINs.
In both systems, PIN #8 can be programmed as a GUEST COMBINATION that will only be
valid for a specified number of successive days. The countdown of days begins the first time
the GUEST COMBINATION is used.
.
Once the time expires, the GUEST COMBINATION will have to be reprogrammed before
it can be used again.
RING BACK AFTER CLOSING
OPTION
INSTALLED
When this option is installed, the bell/siren will sound for two seconds after
the system is armed.
.
If your system is programmed to send closing reports to a monitoring station, ring back
occurs after the signal is sent and acknowledged; otherwise, ring back occurs when the
exit delay expires.
NUMBER OF DAYS GUEST COMBINATION IS VALID
23