Connection; Connecting With A Phone; Disconnecting From Your Phone; Unpairing - Casio 5659 Operation Manual

Connection

Connecting with a Phone

Your watch can connect with a phone that is
paired with it.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
Connecting with a Phone
●
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and start to flash.
e
When a connection is established
between the watch and phone, [CNCT]
and will stop flashing and remain on the
e
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Important!
If you have problems establishing a
●
connection, it could mean that BABY-
G Connected is not running on your
phone. On your phone's home screen,
tap the "BABY-G Connected" icon.
After the app starts up, hold down the
watch's (C) button for at least three
seconds.
Watch Operation Guide 5659
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
BABY-G Connected: "Watch settings"
"Connection time". Next, select a
n
setting of 3 minutes, 5 minutes, or 10
minutes.

Disconnecting from Your Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected

Unpairing

Unpairing the watch from a phone requires
Connected
both BABY-G Connected and watch
operations.
Deleting Pairing Information from
●
BABY-G Connected
1. Y
Tap the "BABY-G Connected" icon.
2. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Hold down (C) for at least one second
to enter the Timekeeping Mode.
2. X
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Disconnected
3. X
Press (C) twice.
This causes the seconds to flash.
4. X
Hold down (B) for at least three
seconds. This will cause the [PAIR] and
[CLR] indicators to alternate on the
display. Release the button when only
[CLR] is displayed.
This deletes the pairing information from
the watch and returns to the timekeeping
display.
5. X
Press (A) to return to the Timekeeping
Mode.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l C
Home City
Seconds
14