Enabling The Button Operation Tone; Configuring Power Saving Function Settings; Returning The Watch To Its Factory Default Settings - Casio 5659 Operation Manual

Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Press (C) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
4.
Press (D) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5.
Press (A) to exit the setting screen.
Note
Note that alarm and timer tones will still
●
sound even while the operation tone is
muted.
Watch Operation Guide 5659
Configuring Power Saving
Function Settings
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Press (C) 14 times.
Home City
This displays [PSON] or [PSOF].
4.
Press (D) to toggle between ON and OFF.
[PSON]: Power Saving enabled.
[PSOF]: Power Saving disabled.
5.
Press (A) to exit the setting screen.
Note
For details about Power Saving, refer
●
to the information below.
Power Saving Function
l
Returning the Watch to Its
Factory Default Settings
This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Reminders
●
Stopwatch
●
Timer
●
Alarm
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
This is the setting mode. The hands
●
Home City
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Press (C) twice.
This causes the seconds to flash.
4.
Hold down (B) for at least seven seconds.
This will cause the [ALL] and [RESET]
indicators to alternate on the display.
Release the button when only [RESET] is
displayed.
5.
Press (A) to exit the setting screen.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Home City
Seconds
23