Recording Your Current Location (Time & Place); Connection; Connecting With A Phone; Disconnecting From Your Phone - Casio BABY-G Operation Manual

Recording Your Current
Location (TIME & PLACE)
While traveling or otherwise on the go, you can
use the procedure below to record your
current location, along with the time and date,
on your phone. Recorded location information
can be viewed on a CASIO WATCHES map
while the watch is connected with your phone.
Recording Your Current Location
●
1. X
Enter the Timekeeping Mode.
Navigating Between Modes
l
2. X
When you are in the location you want
to record, press (D).
This records, in phone memory, the
latitude and longitude of the location you
are in when you press the button, along
with the date and time.
Viewing a Recorded Location on a Map
●
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and start to flash.
e
When a connection is established
between the watch and phone, [CNCT]
and will stop flashing and remain on the
e
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
3. Y
Perform the operation shown on the
phone screen to view recorded location
information.
Note
You can use CASIO WATCHES to
●
delete recorded location information.
Watch Operation Guide 5659

Connection

Connecting with a Phone

Your watch can connect with a phone that is
paired with it.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
Connecting with a Phone
●
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
When a connection is established
between the watch and phone, [CNCT]
and
display.
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Important!
If you have problems establishing a
●
Connected connection, it could mean that CASIO
WATCHES is not running on your
phone. On your phone's home screen,
tap the "CASIO WATCHES" icon. After
the app starts up, hold down the
watch's (C) button for at least three
seconds.
start to flash.
e
will stop flashing and remain on the
e
Connected
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCHES: "Watch settings"
"Connection time with the app".
n
Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.

Disconnecting from Your Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected Disconnected

Unpairing

Unpairing the watch from a phone requires
both CASIO WATCHES phone app and watch
operations.
Deleting Pairing Information from the
●
CASIO WATCHES phone app
1. Y
Tap the "CASIO WATCHES" icon.
2. Y
Perform the operation shown on the
phone screen to unpair.
14