Section 5: Disassembly Guide; Introduction; Beginning Disassembly; Figure 5-1: Sensor Lock, Printer, Paper, And Battery Access Doors - Mallinckrodt Nellcor N-20PA Service Manual

SECTION 5: DISASSEMBLY GUIDE

5.1

INTRODUCTION

5.2

BEGINNING DISASSEMBLY

5.1 Introduction
5.2 Beginning Disassembly
5.3 N-20PA Disassembly Procedure
The device can be disassembled down to all major component parts, including:
• PCBs
• batteries
• cables
• chassis enclosures
Tools required:
• small, Philips-head screwdriver
• small flat-head screwdriver
• needle-nose pliers
• low-power soldering iron
WARNING: Before attempting to open or disassemble the device, turn it
off.
Caution: Observe ESD (electrostatic discharge) precautions when working
within the unit.
19

Figure 5-1: Sensor Lock, Printer, Paper, and Battery Access Doors

Figure 5-1 shows the how to start the N-20PA disassembly.
21
20
34
5-1