Table of Contents
Advertisement
HDD LED
The HDD LED connection is located
on pins 13/14 of JF1. Attach a hard
drive LED cable to display HDD activ-
ity. See the table on the right for pin
definitions.
NIC1/NIC2 LED
The NIC (Network Interface Control-
ler) LED connections for GLAN port 1
are located on pins 11 and 12 of JF1,
and the LED connection for GLAN
Port 2 are on pins 9 and 10. Attach
the NIC LED cables here to display
network activity. Refer to the table on
the right for pin definitions.
Note: The NIC LED connections for
10G_LAN Ports 3/4 is located on
LED1.
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and
UID LED connections. The Red LED
on pin 8 provides warnings of over-
heat, fan failure or power failure. The
Blue LED on pin 7 works as the front
panel UID LED indicator. Refer to the
table on the right for pin definitions.
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to the table on the right for pin defini-
tions.
Chapter 5: Advanced Serverboard Setup
HDD/UID Switch
Pin Definitions (JF1)
Pin#
13
14
GLAN 1/2 LED
Pin Definitions (JF1)
Pin#
9
10
11
12
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions (JF1)
Pin#
Definition
7
Blue_UID LED
8
OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State
Off
On
Flashing
PWR Fail LED
Pin Definitions (JF1)
Pin#
5
6
5-11
Definition
Vcc
HDD Active
Definition
NIC 2 Activity LED
NIC 2 Link LED
NIC 1 Activity LED
NIC 1 Link LED
Definition
Normal
Overheat
Fan Fail
Definition
3.3V
PWR Supply Fail
Advertisement
Table of Contents
