Table of Contents
Advertisement
S
S
UPER
ERVER 1028UX-CR-LL1/1028UX-CR-LL2 User's Manual
PCI / PCIX / PCIe Slot 1 OPRPM
PCI / PCIX / PCIe Slot 2 OPRPM
PCI / PCIX / PCIe Slot 3 OPRPM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled, Legacy
and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a
network device specified by the user. The options are Disabled, Legacy and EFI.
Onboard LAN1 Option ROM
Onboard LAN2 Option ROM
Onboard Video Option ROM
Use this option to select the type of device installed in LAN Port1, LAN Port2,
LAN Port3, LAN Port4, or the onboard video device used for system boot. The
default setting for LAN1 Option ROM is PXE, Disabled for LAN2 Option ROM,
and Legacy for Onboard Video Option ROM.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are Onboard and Offboard.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
fied Extensible Firmware Interface) for network stack support. The options are
Enabled and Disabled.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration/Serial Port 2 Configuration
Serial Port 1/Serial Port 2
Select Enabled to enable the onboard serial port specified by the user. The options
are Enabled and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address of
a serial port specified by the user.
7-24
Advertisement
Table of Contents
