Table of Contents
Advertisement
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis. These carriers also help promote proper airfl ow in the drive bays
(Figure 6-7).
Drive Tray
Installing a Drive into the Hard Drive Carrier
1. Remove the two screws securing the dummy drive to the drive carrier (Figure
6-8).
Figure 6-8: Removing Dummy Drive from Carrier
2. Lift the dummy drive up and out of the carrier.
3. Install a new drive into the carrier with the printed circuit board side facing
downward so that the mounting holes align with those in the carrier.
4. Secure the hard drive by tightening all six screws (Figure 6-9).
Figure 6-7: Chassis Drive Carrier
1
1
6-7
Chapter 6: Advanced Chassis Setup
Dummy Drive
1
1
Advertisement
Table of Contents
