Supermicro SUPERSERVER 6018TR-T User Manual page 70

SUPERSERVER 6018TR-T/TF User's Manual
NIC1/NIC2 LED Indicators
The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1, and the LED
connection for LAN port 2 is on pins 9
and 10. Attach the NIC LED cables here
to display network activity. Refer to the
table on the right for pin defi nitions.
HDD/UID LED
The HDD LED connection is located on
pins 13 and 14 of JF1. Attach a cable to
pin 14 to show the HDD activity status.
Attach a cable to pin 13 to use the UID
switch. See the table on the right for pin
defi nitions.
Power On LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin defi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20 of
JF1. Refer to the table on the right for
pin defi nitions.
Serial Ports
A COM port (COM1) is located on the I/O back panel to provide serial link
connections for the system. Refer to the table on the right for pin-out defi nitions.
Video Connection
A Video (VGA) port is located next to COM1 on the I/O back panel. Refer to the
board layout below for its location.
Pin Defi nitions (JF1)
Pin# Defi nition
9
10
11
12
Pin Defi nitions
Pin# Defi nition
13
14
Pin Defi nitions
Pin# Defi nition
15
16
Pin Defi nitions
Pin# Defi nition
19
20
5-18
NIC1 LED
NIC 2 Activity LED
NIC 2 Link LED
NIC 1 Activity LED
NIC 1 Link LED
HDD LED
(JF1)
3.3V Standby
HD Active
Power LED
(JF1)
3.3V
PWR LED
NMI Button
(JF1)
Control
Ground