Status And Error Messages - Epson ActionLaser 1600 Reference Manual

Using the optional face-up output tray, the printer does not feed
into the face-up tray
Make sure the paper path selector on the top left comer of the
printer is set to the faceup position. Never allow more than
20 sheets to accumulate in the face-up output tray.

Status and Error Messages

Status and error messages tell you what the printer is doing
and let you know when the printer has encountered a problem.
This section contains an alphabetical list of the status and error
messages, giving a brief description of the message and
suggestions for correcting the problem.
If the red Continue light flashes when an error is detected,
correct the problem and then press the Continue button to
clear the error. If the AUTO CONT item in SelecType is ON,
some errors clear automatically even though the problem
remains. In most instances, you should leave AUTO CONT set
to OFF.
CHECK PAPER SIZE
The paper size specified from the software is different than the
paper size specified by the STD SIZE and OPT SIZE settings.
Check to see if the correct paper size is loaded in the standard
tray or optional lower cassette. You may need to change the
STD SIZE and OPT SIZE settings to match the paper size. See
"TRAY SIZE MENU" in Chapter 4 for more information.
6-14 Troubleshooting and Maintenance