Selecting The Paper Source; Selecting The Paper Source; Using Windows Software - Epson ActionLaser 1600 Reference Manual

Selecting the Paper Source

If you have installed the optional lower paper cassette, the
printer has two sources from which to print. Most software
applications have a Printer Setup menu which specifies the
paper source. The setup menu usually has an Auto Select
option that selects the tray based on paper availability and the
size of paper loaded in the tray. If paper is available in both
trays and is the same size, the printer's standard tray is used.
However, you can also explicitly specify the tray from which
you want to print.
If you are using Windows, you can select the paper source
using the Printers icon in the Windows Control Panel so the
paper source setting applies to all your Windows software. The
procedure to do so is discussed in the next section.
If for some reason you cannot choose the paper source from
your software, you can use the SelecType setting STD TRAY or
OPT TRAY in the TRAY SIZE MENU. For more information,
refer to Chapter 4.

Using Windows software

1. In the Main window, double-click on the Control Panel
icon.
2. Double-click on the Printers icon.
3. Choose the Setup button.
4. In the dialog box that appears, select the appropriate paper
source.
If you are using the HP LaserJet 4 driver, the dialog box
gives you several paper source options. These options
translate to the following paper sources available on your
printer.
Paper Handling 2-5