Escp2 And Fx Menu Items; Escp2 And Fx Menu Items - Epson ActionLaser 1600 Reference Manual

printers. For example, some dot matrix printers allow you to
print on oversize sheets that cannot be accommodated by the
ActionLaser 1600; if this is the case, be sure to change the
PAGE SIZE setting. Check also that ORIENTATION is correct.
Note:
In ESC/P 2 and FX emulations, the COPIES settingfunctions
one page of data and printing it the requested number of times (as is
done in LJ4 emulation), the printer creates as many pages of data as
requested, thus increasing the length of time it takes to print multiple
setting. SelecType settings that are specific to the ESC/P 2, FX,
and GL/2 emulations are described in this chapter.

ESCP2 and FX Menu items

If you are not able to use your software program to change
printer settings when using ESC/P 2 or FX emulation, use the
SelecType ESCP2 MENU and FX MENU. See Chapter 4 for
details on using SelecType. Normally, however, you should
use your software to change printer settings.
Except where otherwise noted, the same items are available for
either emulation. Be sure to reset the printer after you have
changed any setting; otherwise the new setting will not be
valid.
Using Other Printer Emulations
5-5