Supported Emulations And Control Languages; Lj4 Emulation; Lj4 Emulation Commands - Epson ActionLaser 1600 Reference Manual

Supported Emulations and Control Languages

Your printer has the ability to emulate the following printers in each
printer emulation:
LJ4
ESC/P 2
FX
GL/2
In addition, the following printer control languages are supported
This appendix lists the available printer comman ds for these emulations.
Most of the
language; however, some have operational differences because the
printers use different technologies. Footnotes are used to mark commands
with differences. For additional information, see Chapter 5, "Using Other
Printer Emulations."

LJ4 Emulation

This section lists the

LJ4 emulation commands

The following notes apply to various commands in the following
command summary:
1 lhse commands are specific to the Epson ActionLaser 1600.
2 See the Hewlett-Packard LaserJet 4 Technical Reference Manual fc~ additional symbol sets
3 Secondary printer commands are spscified as ""dsry by using s r&ht parenthesis +' in the command
instead of a left parenthes~
4 llws commands show the Epon font (typeface) family names. The corresponding HP equivalents are
shown in psrenthsaes
B - 2 GnnmandSummay
Hewlett-Packard LaserJet 4 (PCL 5e)
Epson LQ-570 (24pin)
Epson FX 870/1170 (9-pin)
Hewlett-Packard GL/2 graphics language
Printer Job Language
Epson Job control Language
commands
closely emulate the original printer or the control
printer commands supported by LJ4 emulation.