Cleaning the inside of the printer
Fine particles of paper dust and ordinary dust can collect inside
the printer. Follow the steps below to clean the inside of the
printer and the paper feeder:
1. Make sure the printer is turned off.
2. Open the printer cover.
3. Remove the imaging cartridge from the printer.
4. Remove any dirt inside the printer with a soft, clean cloth.
Do not use compressed air.
5. Replace the imaging cartridge.
6. Close the printer cover.
Warnings
Opening the printer exposes the fuser, which is marked by a
CAUTION HOT SURFACE label. If you have used the
printer recently, the fuser may be hot; be careful not to touch
it. Let the printer cool before you clean inside it.
Troubleshooting and ZMaintenance
6-25