Testing The Omg System After Installation - Sierra Wireless oMG 2000 Installation Manual

Hide thumbs Also See for oMG 2000:
Table of Contents

Advertisement

4: Testing the oMG System after
Installation
After completing the installation of the oMG system in a vehicle, perform the turn-up
test described below to verify that the system operates properly. This procedure is
typically performed by an IT specialist with experience in:
1. Turn on the vehicle ignition and confirm that the base unit Power and Status LEDs
2. Use a Wi-Fi-equipped notebook computer to verify that the wireless local area
3. Connect to the oMG network from your notebook computer.
4. Verify that the oMG system is operational in one or more of the following ways:
5. Verify that you can access the Internet:
Note: If you have a problem with any of these steps, contact Sierra Wireless Technical Support
(see
Rev 1 May.16
TCP/IP
Wi-Fi networks
Cellular uplinks
are lit. For more information about interpreting the status indicators, see
Indicators
on page 9.
network (WLAN) of the oMG system is available. Check for the availability of the
SSID that your organization has set (if any), or for the default SSID (the oMG's
serial number).
· Example: Verify presence of WLAN with Windows
In the Windows system, click the Wireless Network Connection icon in the
taskbar notification area. When the Wireless Network Connection window
appears, check that the SSID that you expect is in the Choose a wireless
network list.
a. Check the TCP/IP configuration of your computer (e.g. in Windows, use the
ipconfig command in a command-line window). The IP address of your
computer has been set to 172.22.0.x, where x is in the range of 100 to 200.
b. Ping the default gateway, which is 172.22.0.1.
c. With a web browser, browse to the Local Configuration Interface (LCI) of the
oMG system at the following URL:
a. Browse to a reliable website using a web browser.
b. Access your e-mail service using your e-mail client.
c. Use an application that your organization provides in order to access the
network of your organization. For example, establish a virtual private network
(VPN) connection to your organization.
Contact Information
on page 3).
16
http://welcome.to.inmotion/MG-LCI
4
Status
4119192

Advertisement

Table of Contents
loading

Table of Contents