Panasonic Lumix S1R Operating Instructions Manual page 464

17. Materials
Monitor/Viewfinder
The monitor/viewfinder turns off when the camera is turned on.
If no operations are performed during the set time period, [Auto LVF/Monitor Off]
0
(l 44) is activated, and the Monitor/Viewfinder turns off.
When an object or your hand is positioned near the eye sensor, the Monitor display
0
may switch to the Viewfinder display.
It may flicker for an instant or the brightness of the screen may
change significantly for an instant.
This occurs when the shutter button is pressed halfway, or when the subject
0
brightness changes, making the lens aperture change.
This is not a malfunction.
Cannot switch between the monitor and viewfinder even when [LVF]
is pressed.
When the camera is connected to a PC or printer, it is not possible to switch to the
0
viewfinder display.
Unevenly bright parts or irregular colours appear on the viewfinder.
The viewfinder of the camera is built with OLED components Screen burn-in may
0
occur on the screen/viewfinder when a same image is displayed for a long period of
time, but it does not affect the recorded images.
The colouring of the viewfinder differs from the actual tone.
This is characteristic of the viewfinder of the camera and not a malfunction.
0
It does not affect the recorded images.
Flash
The flash does not fire.
The flash does not fire when using the following functions:
0
– Video recording (l 230)/[6K/4K PHOTO] (l 130)/[Post-Focus] (l 161)
– [ELEC.] (l 170)/[Silent Mode] (l 169)/[High Resolution Mode] (l 210)
– [Filter Settings] (l 204)
464