Panasonic Lumix S1R Operating Instructions Manual page 228

10. Flash
Setting Items ([Wireless Setup])
To fire a test flash, press [DISP.].
0
[External
¢1
Flash]
[A Group]/
[B Group]/
[C Group]
¢1 This cannot be selected when [Wireless FP] is set.
¢2 This cannot be set when using the Flash (DMW-FL200L: optional).
228
[TTL]: The camera automatically sets the flash output.
[AUTO]
side.
[Firing
[MANUAL]: Sets the flash output of the external flash
Mode]
manually.
[OFF]: The external flash outputs only communication
light.
[Flash Adjusts the flash output of the external flash manually
Adjust.] when [Firing Mode] is set to [TTL].
Sets the flash output of the external flash when [Firing
[Manual
Mode] is set to [MANUAL].
Flash
It can be set within the range of [1/1] (full flash output)
0
Adjust.]
to [1/128] in 1/3 steps.
[TTL]: The camera automatically sets the flash output.
[AUTO]
side.
[Firing
[MANUAL]: Sets the flash output of the wireless flash
Mode]
manually.
[OFF]: The wireless flashes of the specified group will
not fire.
[Flash Adjusts the flash output of the wireless flash manually
Adjust.] when [Firing Mode] is set to [TTL].
Sets the flash output of the wireless flash when [Firing
[Manual
Mode] is set to [MANUAL].
Flash
It can be set within the range of [1/1] (full flash output)
0
Adjust.]
to [1/128] in 1/3 steps.
¢2 : Sets the flash output on the external flash
¢1 : Sets the flash output on the wireless flash