Panasonic Lumix S1R Operating Instructions Manual page 158

7. Drive/Shutter
[More Settings] (Exposure Bracket)
[Step]
[Sequence]
[Single Shot
Setting]
When you record images with Exposure Bracket after setting the exposure
0
compensation value, the images recorded are based on the selected
exposure compensation value.
[More Settings] (Aperture Bracket)
[Image Count]
Example when the initial position is set to F8.0
2.8 4.0 5.6
1 1st image, 2 2nd image, 3 3rd image ... 7 7th image
158
Sets the image count and exposure compensation step.
[3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record
7 images in 1 EV steps)
Sets the order in which images are recorded.
[ ]: Takes only one image each time the shutter button is
pressed.
[ ]: Takes all of the set number of images when the shutter
button is pressed once.
The bracket indication blinks until all of the set number of
0
pictures is taken.
This cannot be set when taking burst pictures.
0
If you press and hold the shutter button, burst pictures are
taken until the set number of images is recorded.
[3]/[5]: Records the set number of images while alternately
setting the aperture value in the sequence of one before and
then one after using the initial aperture value as the reference.
[ALL]: Records images using all aperture values.
If you press and hold the shutter button, burst pictures are
0
taken until the set number of images is recorded.
8.0 11 16 22