Panasonic Lumix S1R Operating Instructions Manual page 391

4
Record with the camera.
This automatically sends the recorded pictures to the specified device as they
0
are taken.
[ ] is displayed in the recording screen of the camera while a file is being
0
sent.
To Stop the Automatic Transfer of Images
[ ] [
A confirmation screen is displayed, asking you to terminate the Wi-Fi
≥
connection.
If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the
0
camera automatically connects to the smartphone via Bluetooth and Wi-Fi
when you turn on the camera.
Start up the "LUMIX Sync" to connect to the camera.
The camera will enter a mode where it can automatically transfer images and
[ ] is displayed in the recording screen of the camera.
When [Auto Transfer] is set to [ON], [Wi-Fi Function] cannot be used.
0
If the camera is turned off during image transfer, and the file sending is
0
interrupted, then turn on the camera to restart the sending.
– If the storage status of unsent files changes, then sending of files may no
longer be possible.
– If there are many unsent files, then sending of all files may not be possible.
Saving RAW format images on Android devices requires Android 7.0 or
0
higher.
Depending on the smartphone or the OS, these may not be displayed
correctly.
0 Images recorded with the following functions cannot be transferred
automatically:
– Video recording/[6K/4K PHOTO]/[Post-Focus]
– [HLG Photo] (HLG format pictures)
] [Bluetooth] [Auto Transfer]
15. Wi-Fi/Bluetooth
Select [OFF]
391