Panasonic Lumix S1R Operating Instructions Manual page 461

Multiple images are recorded at once.
When drive mode is set to [
0
and holding the shutter button will take burst pictures. (l 125)
When bracketing is set, then pressing the shutter button records multiple images
0
while automatically changing the settings. (l 155)
The subject is not focused properly.
Confirm the following details:
0
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]? (l 332)
– Is [Focus/Shutter Priority] set to [RELEASE]? (l 329)
– Is AF Lock (l 191) set where it is not appropriate?
The recorded image is blurred.
The stabiliser is not effective.
The shutter speed will become slower and the stabiliser function may not work
0
properly when recording in dark places.
In these cases, use a tripod and the self-timer when recording.
The recorded image looks rough.
Noise appears on the picture.
Try the following:
0
– Reduce the ISO sensitivity. (l 192)
– Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each
item other than [Noise Reduction] to the negative direction. (l 201)
– Set [Long Exposure NR] to [ON]. (l 306)
The subject appears distorted on the image.
When a moving subject is recorded while using the following functions, the subject
0
may appear distorted in the picture:
– [ELEC.]
– Video recording
– [6K/4K PHOTO]
This is a characteristic of the CMOS sensor that is the image sensor of the camera,
and is not a malfunction.
] (Burst Shot 1) or [
17. Materials
] (Burst Shot 2), pressing
461