Panasonic Lumix S1R Operating Instructions Manual page 133

[6K/4K Burst(S/S)]
1 Press the shutter button fully to start
recording.
2 Press the shutter button fully again to
stop recording.
C Start (First)
D Stop (Second)
E Recording is performed
You can add markers by pressing [Q] during recording. (Up to 40 markers per
0
recording)
This allows you to skip to the positions where you added markers when
selecting pictures from a 6K/4K burst file.
[6K/4K Pre-Burst]
Press the shutter button fully.
F Approx. 1 second
G Recording is performed
While the recording screen is displayed, the
0
AF will operate constantly to continue
focusing.
The exposure is also adjusted continuously, except in [M] mode.
When the subject is not at the centre, use AF/AE Lock if you wish to lock the
0
focus and exposure. (l 191)
The camera takes burst pictures and saves the data as a 6K/4K burst file for
0
which [Rec. File Format] is [MP4].
In default settings, Auto Review operates, and a screen that lets you select
0
pictures from a burst file will be displayed.
To continue recording, press the shutter button halfway to return to the
recording screen.
For how to select and save pictures from a recorded 6K/4K burst file, refer to
page 138.
7. Drive/Shutter
133