Panasonic Lumix S1R Operating Instructions Manual page 413

[WPS (Push-Button)] (l 413)
[WPS (PIN code)] (l 414)
[From List] (l 414)
After selecting [Via Network] once, the camera will connect to the previously-
0
used wireless access point.
To change the wireless access point used for connection, press [DISP.] and
change the connection destination.
[WPS (Push-Button)]
Press the WPS button on the wireless access
point to set up a connection.
Press the wireless access point WPS button until
it switches to WPS mode.
Press the WPS button on the wireless access
point to set up a connection.
Enter a PIN code into the wireless access point to
set up a connection.
Searches for a wireless access point to use, and
connects to this.
15. Wi-Fi/Bluetooth
Example)
413