Panasonic Lumix S1R Operating Instructions Manual page 310

14. Menu Guide
[Focus]
[Focus Peaking]
310
[ON]/[OFF]
[SET]
During MF operation, in-focus portions (portions
on the screen with clear outlines) are highlighted
with colour.
If the [Focus Peaking Sensitivity] is adjusted to
0
the negative direction, portions to be highlighted
are reduced, allowing you to achieve a more
precise focus.
With [Display Color], you can set the display
0
colour of the in-focus portion.
If [Display While AFS] is set to [ON], when the
0
shutter button is pressed halfway in focus mode
[AFS], you can display Peaking.
You can display the Touch Tab (l 333) and then
0
touch [ ] in [
When [Rough Monochrome] of [Filter Settings]
0
is being used, [Focus Peaking] is not available.
When [Live View Boost] is being used, [Focus
0
Peaking] is not available.
This menu item can be registered to the Fn
0
button. (l 278)
[Focus Peaking
Sensitivity]
[Display Color]
[Display While AFS]
] to switch [ON]/[OFF].
—