Lutron Electronics AM-4233SD Operation Manual page 15

then " REC " symbol will flashing per sampling time, at
the same time the measuring data along the time
information will be saved into the memory circuit.
Remark :
How to set the sampling time, refer to Chapter 7-2,
*
page 19.
How to set the beeper sound is enable, refer to
*
Chapter 7-4, page 20.
b. Pause the datalogger
During execute the Datalogger function, if press the
" LOG Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the " REC " symbol will stop flashing, the lower LCD
will show the text of " Log " ( or show " Log " with the
Temp. value alternately ).
Remark :
If press the " LOG Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the " REC " symbol
will flashing.
c. Finish the Datalogger
During execute the Datalogger function, press the
" LOG Button ( 3-8, Fig. 1 ) > 1.5 seconds continuously
again will finish the Datalooger function, the " Log "
text will be disappeared and finish the Datalogger.
function.
13