Air Flow Measurement; 4-4Type K/J Thermometer - Lutron Electronics AM-4233SD Operation Manual

4-3 Air flow measurement.

a. Function select to " Air flow " , refer to page 8.
AirF/USA : Air flow in CFM unit
or
AirF/Euro : Air flow in CMM unit
Remark :
a. How to select the CFM air flow or CMM air flow,
details please reefer to Chapter 7-9, page 22.
b. Set air flow area dimension ( ft^2 or meter^2 )
at the first, details please refer to Chapter 7-10, page 23.
c. Other procedures same as " Air velocity/Temp.
measurement ", refer to page 9.
4-4 Type K/J thermometer
a. Function select to " Type K/J thermometer ",
refer to page 8.
b. Plug the Thermocouple Temp. Probe ( Type K Temp.
probe pr Type J Temp. probe, optional ) into " Type
K/J Probe Input Socket " ( 3-10, Fig. 1 )
The Display will show the measuring value that
sensing from the Temp. probe.
c. If the Display show the indicator " K ", it is ready
for Type K thermometer.
If the Display show the indicator " J ", it is ready
for Type J thermometer.
Remark :
The meter is defaulted to " Type K thermometer ".
If intend to select the " Type J thermometer with
default , please refer chapter 7-8, page 22.
10