Configuration - CTEK HOME LOAD BALANCING WITH CHARGESTORM CONNECTED 2 Installation Manual

Configuration

NOTE: CTEK E-Mobility recommends that the installation technician documents the re-
sult of the configuration tests in a dedicated protocol�
1� If the configuration laptop runs Microsoft Windows, download the control board
drivers from the CTEK website�
NOTE: For Linux, Android and Mac OSX, the USB driver is part of the operating system�
2� Connect the USB cable between
the computer and the mini USB
port on the controller board�
3� Open the web browser and log
in to the local web interface at
http://192�168�7�2� The user name
and password are both "ccu"�
NOTE: CTEK E-Mobility recommends
web browser Chrome for this action�
4� Navigate to "Configuration"�
a� Select "Grid"�
b� Change from NanoGrid™ Load
Balancing "None" to "Home"�
c� Change the settings for the
"Fuse Rating" to the max cur-
rent limit of your property�
d� Press "Save"�
e� Reset�
Navigate to "Status" and make
5�
sure that the energy meter with
adress 222 exists�
6
CTEK E-Mobility AB