Download Print this page

WaterLogic WLH2 Classe Quick Start Manual page 3

Hide thumbs Also See for WLH2 Classe:

Advertisement

WLH2 CLASSE FEATURES AND BENEFITS
Sparkling and Still Cold Water
Counter Top and Cabinet Models come standard with Sparkling and Still Cold Water Selections
to meet a wide range of customer demands. Cold Water Temperature is not adjustable.
Programmable Volumetric Dispense Settings
The WLH2 Classe is equipped with programmable volumetric dispense settings. Using the
dispense buttons, preset volumes of water dispensed can be configured for each of the 4
dispense buttons.
Large Dispense Area with Adjustable (and Removeable) Drip Tray
12.25" from Faucet to drip tray allow for a wide range of water containers. The Drip Tray height
can also be adjusted to accommodate for filling of standardized containers. The Drip Tray is also
removeable to easily dump any water that has overflowed or spilled during dispense.
Firewall Advanced Purification
Firewall is a proprietary technology that places the UV lamp at the point of dispense. This point
of dispense purification keeps the dispense nozzle free from external contamination as well as
purifying the water, making the freshest water possible.
Ice Bath Drain Port
The WLH2 Classe is equipped with a drain port to the ice bath. This makes for easier
maintenance as well to ease transport if needed.
Energy Saver
The WLH2 Classe comes from the factory with Energy Saver active. For the Classe to comply
with Energy Star, the energy saver must come activated (ON) from the factory. When no
buttons are pressed on the front user interface panel, the machine will automatically enter
energy saver mode after 3 hours of inactivity, and the compressor cycle will be set to a 20 hour
cycle. When any one of the front buttons are pressed while the system is in energy saver
mode, the Classe will exit energy saver mode, and the compressor will enter its normal
operation mode. Energy saver can be disabled/enabled by using the small black button on the
back of the machine labeled "sleep mode". While sleep mode is inactive, the 4
th
LED (crescent
moon) will NOT be lit. When it has entered energy saving mode, the 4
th
LED (crescent moon)
will be lit.
WLH2 Classe Manual
Page 6 – Revision: 3-2-2021

Advertisement

loading