Settings Control Panel Vmn3 - Viessmann Vitotron 100 Operating Instructions For The System User

Settings
Control panel VMN3
Settings:
If other heating circuits are installed in the system,
these must be selected in the menu:
Boilers
■
Heating circuits.
■
If no other heating circuits are installed, the list of
settings appears with a boiler.
Central heating program (only available in the basic modules and with an active
■
Tr sensor) [Configuration > Room temperature > Room temperature sensor > Tr]
A Period number (max. 5)
B Start time of the selected program
C End time of the selected program
D Temperature selection:
– Numbers 1 to 8 > Setting of 8 daily programs
in each day program. There are 5 adjustable
periods, each of which can be assigned a
room temperature (
The process for setting daily programs is
described in Daily schedule.
 N ote:Ifnointervalsaredefined,an
energy saving temperature is used. (
– Weekly: A preset is assigned on each day of the
weekly program.
12
(cont.)
, , ,
, , , ).
).
Boiler settings
Central heating flow temperature: Set flow
■
temperature (only available in the basic module with
fixed parameters for the room temperature control
unit)
[Configuration > CH > Control > Fixed parameters].
Room temperature (only available when Tr sensor
■
is active) [Configuration > Room temp. > Room
sensor > Tr]:
– Energy saving , Comfort-
Comfort+ : Set room temperature available in
the schedules
– Party, Holiday: Selection of temperatures to be
applied in the PARTY and HOLIDAY programs.
DHW temperature|
■
(only available in systems with a cylinder):
– Energy saving , Comfort
DHW temperature available in the schedules.
, Comfort ,
: Selection of