Viessmann Vitotron 100 Operating Instructions For The System User page 10

Operation
Control panel VMN3
Room temperature display
Frost protection
Energy saving temperature
Comfort temperature
Comfort temperature plus
Comfort temperature minus
Demand for heating energy via the room temperature controller (with the internal control unit)
Displays the start of time-controlled buffer charging
Appliance fault display
DHW circulation pump is running
Heating mode ON
Heating circuit parameter information
The screen shows flow temperature A, set temperature
B and heating circuit identifier C (assigned in the
VCMG3 module configuration). If there is no heat
demand, temperature B is not displayed.
10
(cont.)