Control panel VMN3
Buffer program
■
(only available in buffer mode).
A Period number (max. 5)
B Start time for buffer charging
C End time for buffer charging
–
Numbers 1 to 8 > Setting of 8 daily programs
each with 5 adjustable periods during which the
cylinder is charged.
The process for setting daily programs is
described in Daily schedule.
–
Weekly: Assignment of one setting per day of the
week for the daily programs.
DHW program (only available in systems with a DHW cylinder):
■
A Period number according to schedule (max. 5)
B Start time for selected temperature
C End time for selected temperature
D Temperature selection:
–
Numbers 1 to 8 > Setting of 8 daily programs per
day program with 5 adjustable periods, each of
which can be assigned a cylinder temperature
(
,
).
The process for setting daily programs is
described in Daily schedule.
N ote:Ifnotemperatureisdefined,an
energy saving temperature is used (
–
Weekly: Assignment of one setting per day of the
week for the daily programs.
(cont.)
,
).
Settings
13