Appendix Terminology; Disposal Information - Viessmann Vitotron 100 Operating Instructions For The System User

Terminology
Constant temperature operating mode for VLN3
In constant temperature mode, the heating water
is constantly heated to the selected boiler water
temperature.
Heating water temperature
The temperature of the heating water that flows to the
radiators (roughly equal to boiler water temperature).
Boiler water temperature
The heating water in the boiler (boiler water) is
heated to the temperature set at the control unit. This
temperature is referred to as boiler water temperature.
Room temperature-dependent operation
A room temperature controller captures the
room temperature and compares this with the
required room temperature you set. If the room
temperature is lower than the required value, the
boiler is switched on; if the room temperature is
higher than the required value, the boiler is switched
off.
Make any settings on the connected room temperature
controller using the relevant operating instructions.
Note
The heating water temperature must be set high
enough in order to achieve the required room
temperature.
Information on disposal
Disposal of packaging
Your heating contractor will dispose of the packaging
for your Viessmann product.
Final shutdown and disposal of the heating system
Viessmann products can be recycled. Components
and fluids from your heating system do not belong
in ordinary domestic waste.
Please contact your heating contractor regarding the
correct disposal of your old system.
Safety valve
Safety equipment that must be installed in the cold
water line by your heating contractor. The safety valve
opens automatically to prevent excess pressure in the
DHW cylinder.
Drinkingwaterfilter
A device that removes solids from potable water.
Flow temperature
The temperature of the heating water that flows to the
radiators (in the flow line). Accordingly, the temperature
of the heating water that flows from the radiators to
the boiler (in the return line) is referred to as return
temperature.
Weather-compensated operation of the VMN3
In weather-compensated operation, the flow
temperature is controlled according to the outside
temperature. This means that no unnecessary heat is
generated in order to heat the rooms to the required
room temperature you selected.
The outside temperature is captured and transmitted to
the control unit by a sensor fitted outside the building.
DE Packaging waste is sent to a certified disposal
contractor for recycling in line with statutory
regulations.
AT: Packaging waste is sent to a certified disposal
contractor for recycling in line with statutory
regulations. Use the ARA statutory disposal
system (Altstoff Recycling Austria AG, licence
number 5766).
DE: Operating fluids (e.g. heating medium) can be
disposed of at municipal collection points.
AT: Operating fluids (e.g. heating medium) can be
disposed of at municipal collection points (ASZ).
Appendix
27