Controller For Boiler Sequence Control/Charging Control Panel; Charging Control Panel Without Boiler Sequence Control; Charging Control Panel With Boiler Sequence Control; Buffer Controller With Boiler Sequence Control - Viessmann VITOFLEX 300-UF Technical Manual

Control unit
(cont.)

3.7 Controller for boiler sequence control/charging control panel

Charging control panel without boiler sequence control

For part no., see pricelist
This charging control panel is used to activate the shared discharg-
ing and conveying equipment of a twin boiler system without boiler
sequence control.
Boiler sequence control incl. buffer management is carried out by an
on-site higher ranking control system (e.g. building management
system).

Charging control panel with boiler sequence control

For part no., see pricelist
This charging control panel is used to activate the shared discharg-
ing and conveying equipment of a twin boiler system with boiler
sequence control, incl. buffer controller.

Buffer controller with boiler sequence control

For part no., see pricelist
This buffer controller is used to control buffer management in twin
boiler systems.
The Ecocontrol regulates buffer management incl. boiler sequence
control.
VITOFLEX 300-UF
Note
Required for each boiler system:
■ Output signals 0-10 V
■ External demand ON/OFF
Required for each drive (e.g. discharge, screw conveyors):
■ External drive switching (with or without light barrier)
Note
Required for each drive (e.g. discharge, screw conveyors):
■ External drive switching (with or without light barrier)
Note
The boiler systems each have their own fuel charging system (dis-
charge and conveying equipment).
3
Viesmann
25