Mounting the control unit
Edge protector
qO
Mounting bracket
wP
Control unit mounting bracket, control unit back panel and burner cables
3.
2.
1.
Fig. 15
Prior to mounting the side panels, route the burner
cable and the boiler water temperature sensor lead.
The side panel for the control unit can be mounted on
the right or left.
Hook side panels into the slots provided, starting at the
bottom and working upwards.
!
Please note
Never allow cables/leads to come into contact
with hot components.
Secure all cables/leads with cable ties if neces-
sary.
18
(cont.)
Note
If no burner cables were supplied, provide burner
cables on site.
Route the burner cables along the side of the boiler
where the boiler door is hung.
Connections to the control unit back panel
Boiler control unit installation instructions