Table of Contents
Advertisement
11 TUNING THE CHASSIS
11.13
98
Handlebar position
S02163-10
Finishing work
–
Install the shock absorber.
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
The holes on the handlebar support are placed at a distance
A
of
from the center.
3.5 mm (0.138 in)
A
Hole distance
The handlebar can be mounted in 2 different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
p. 93)
p. 91)
Advertisement
Table of Contents
