Loctite - Husqvarna 701 Enduro LR Owner's Manual

SERVICE WORK ON THE CHASSIS 12
–
Check the chain sliding guard for wear.
» If the lower edge of the chain pins is in line with, or below,
the chain sliding guard:
–
Replace the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain
sliding guard
V00513-10
M6 8 Nm (5.9 lbf ft)

Loctite

® 243™
121