Table of Contents
Advertisement
15.11
Checking the headlight setting
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertically at a distance
wall.
400726-10
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and pas-
senger if applicable.
–
Switch on the low beam.
–
Check the headlight setting.
The light-dark boundary must be exactly on the lower
marking when the motorcycle is ready to be operated with
the rider mounted along with any luggage and a passenger
if applicable.
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
ELECTRICAL SYSTEM 15
B
under the first marking.
5 cm (2 in)
A
away from the
5 m (16 ft)
p. 198)
197
Advertisement
Table of Contents
